PCT11 Combi Tool

(0)No Reviews yet

Details

Details

Cordless Combi Tool, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability.

  • Unparalleled speed for faster rescue operations - Fastest combi tool on the market thanks to Stepless Speed Maximization (patented) – The tool continuously optimizes its motor and pump settings, giving you maximum speed at any tool load - Maximum operating flexibility with two operation modes – Reduced speed training/demo mode and high speed Pentheon mode
  • Ultimate speed control for more controlled tool handling - Two-speed inline control handle – Switch between high-speed and low-speed and keep perfect control at all times
  • Guaranteed maximum power during a tool’s entire lifespan - Electronic motor control and pressure monitoring – Constant lifetime performance for every Pentheon tool
  • Battery management made easy - Charge batteries directly on the tools with the On-Tool Charging System - Priority charging for on-tool batteries over batteries on a separate charger - Charge up to six batteries automatically – Connect up to three chargers to one single outlet - Holmatro battery – Power Pentheon tools as well as OmniLock struts (patented) and other upcoming Holmatro products
  • Superb ergonomics for effortless handling - Easy tool operation on all sides of a vehicle – Inline control handle with 360° access - Hold every tool in any position – 360° carrying handle made of tough, damage-proof material
  • Continue your mission under all conditions - Flawless performance under water, at high and low outdoor temperatures and in rain and snow - Easier communication during rescue operations – A new and improved drive system ensures tool operation at a lower sound level - Automatic LED lights in the carrying handle, powered by the main battery. The lights can also be operated manually
  • Realtime tool insights to adapt and change tactics - Connect every tool to your tablet or phone with Bluetooth® - Easy to use and intuitive MyHolmatro app - Real-time diagnostics during every operation – Monitor battery state of health and state of charge, pump stage, motor temperature, working pressure (including peak pressure) and speed mode
  • Automatically keep your tools in perfect condition - Quickly and easily perform an automated Pentheon Self Check with the MyHolmatro app – Automatically check the drive system, speed and pressure, battery firmware and battery state of health
  • Effortless tool maintenance - Premium tool service thanks to the Holmatro Inspection Procedures (HIP) – An extensive software program for Authorized Holmatro (Dealer) Service Technicians

Basic specifications

model
PCT11
max. working pressure
10.443psi
max. working pressure
720 / 72(bar/Mpa)
battery included
no
connectivity, mobile app
Bluetooth

Performance

spreading distance
281mm
max. cutting opening
196mm
max. cutting opening
7,7in
max. spreading force
303.492lbf
spreading distance
11,1in
min. spreading force (EN 13204)
10.791lbf
min. spreading force (EN 13204)
48 / 4.9(kN/t)
max. spreading force
1350 / 137.7(kN/t)
theoretical cutting force
60.249lbf
theoretical cutting force
268 / 27.3(kN/t)
max. squeezing force
9.892lbf
max. squeezing force
44 / 4.5(kN/t)
min. squeezing force (EN 13204 2025 Ed.)
4.991lbf
min. squeezing force (EN 13204 2025 Ed.)
22.2 / 2.3(kN/t)
protection rate
IP57
sound emission @ 1m/3.25ft
74dB(A)
sound emission @ 4m/13ft
65dB(A)
vibration level
<2,5m/s²
directives
2006/42/EC, 2014/30/EU, 2014/53/EU

General specifications

hydraulic oil type
ISO-L HV VG 36

Dimensions, weight and temperature

Safety factors / tests

hydraulic safety factor
2:1
endurance test tool
1000 cycles of spreading while the tool is loaded and 1000 cycles of biting in material thatcannot be cut
endurance test dead man's handle
6000 cycles

Norms

temperature range
-20 +55°C
temperature range
-4 +131°F
dimensions (AxBxC)
677 x 270 x 275mm
dimensions (AxBxC)
26.7 x 10.6 x 10.8in
weight, ready for use (incl. battery)
13,7kg
weight, ready for use (incl. battery)
30,2lb
weight (excl. battery)
12,1kg
weight (excl. battery)
26,7lb
EN 13204 compliant
yes
EN 13204 classification
BK48/281E-13.8
EN 13204 2025 Ed classification
F-CT2-48/281-E
EN 13204 cutting capacity
1E 2E 3E 4E 5E
NFPA 1960 compliant
yes
NFPA 1960, cutting capacity
A5 B5 C5 D6 E4 F3
NFPA 1960, HSF
11.690lbf
NFPA 1960, HSF
52 / 5.3(kN/t)
NFPA 1960, LSF
8.992lbf
NFPA 1960, LSF
40 / 4.1(kN/t)

Cutting performance

round bar (S235 acc. to EN 13204)
24mm
round bar (S235 acc. to EN 13204)
0,9in


Ratings & Reviews

No reviews available

Be the first to Write a Review