PCT60 Combi Tool
Details
Details
Cordless Combi Tool, part of the Holmatro Pentheon Series. Designed to offer you unrivaled performance, superior usability, advanced connectivity and exceptional serviceability.
- Unparalleled speed for faster rescue operations - Fastest combi tool on the market thanks to Stepless Speed Maximization (patented) – The tool continuously optimizes its motor and pump settings, giving you maximum speed at any tool load - Maximum operating flexibility with two operation modes – Reduced speed training/demo mode and high speed Pentheon mode
- Ultimate speed control for more controlled tool handling - Two-speed inline control handle – Switch between high-speed and low-speed and keep perfect control at all times
- Guaranteed maximum power during a tool’s entire lifespan - Electronic motor control and pressure monitoring – Constant lifetime performance for every Pentheon tool
- Battery management made easy - Charge batteries directly on the tools with the On-Tool Charging System - Priority charging for on-tool batteries over batteries on a separate charger - Charge up to six batteries automatically – Connect up to three chargers to one single outlet - Holmatro battery – Power Pentheon tools as well as OmniLock struts (patented) and other upcoming Holmatro products
- Superb ergonomics for effortless handling - Easy tool operation on all sides of a vehicle – Inline control handle with 360° access - Hold every tool in any position – 360° carrying handle made of tough, damage-proof material
- Continue your mission under all conditions - Flawless performance under water, at high and low outdoor temperatures and in rain and snow - Easier communication during rescue operations – A new and improved drive system ensures tool operation at a lower sound level - Automatic LED lights in the carrying handle, powered by the main battery. The lights can also be operated manually
- Realtime tool insights to adapt and change tactics - Connect every tool to your tablet or phone with Bluetooth® - Easy to use and intuitive MyHolmatro app - Real-time diagnostics during every operation – Monitor battery state of health and state of charge, pump stage, motor temperature, working pressure (including peak pressure) and speed mode
- Automatically keep your tools in perfect condition - Quickly and easily perform an automated Pentheon Self Check with the MyHolmatro app – Automatically check the drive system, speed and pressure, battery firmware and battery state of health
- Effortless tool maintenance - Premium tool service thanks to the Holmatro Inspection Procedures (HIP) – An extensive software program for Authorized Holmatro (Dealer) Service Technicians
Basic specifications
| model | PCT60 |
| max. working pressure | 10.443psi |
| max. working pressure | 720 / 72(bar/Mpa) |
| battery included | no |
| connectivity, mobile app | Bluetooth |
Performance
| spreading distance | 468mm |
| max. cutting opening | 394mm |
| max. cutting opening | 15,5in |
| pulling distance | 342mm |
| max. spreading force | 418.145lbf |
| pulling distance | 13,5in |
| spreading distance | 18,4in |
| min. spreading force (EN 13204) | 10.004lbf |
| min. spreading force (EN 13204) | 44.5 / 4.5(kN/t) |
| max. spreading force | 1860 / 189.7(kN/t) |
| theoretical cutting force | 208.848lbf |
| theoretical cutting force | 929 / 94.7(kN/t) |
| max. squeezing force | 19.761lbf |
| max. squeezing force | 87.9 / 9(kN/t) |
| min. squeezing force (EN 13204 2025 Ed.) | 16.523lbf |
| min. squeezing force (EN 13204 2025 Ed.) | 73.5 / 7.5(kN/t) |
| max. pulling force | 23.605lbf |
| max. pulling force | 105 / 10.7(kN/t) |
| protection rate | IP57 |
| sound emission @ 1m/3.25ft | 74dB(A) |
| sound emission @ 4m/13ft | 65dB(A) |
| vibration level | <2.5m/s² |
| directives | 2006/42/EC, 2014/30/EU, 2014/53/EU |
General specifications
| hydraulic oil type | ISO-L HV VG 36 |
Dimensions, weight and temperature
| temperature range | -20 +55°C |
| temperature range | -4 +131°F |
| dimensions (AxBxC) | 1011 x 270 x 275mm |
| dimensions (AxBxC) | 39.8 x 10.6 x 10.8in |
| weight, ready for use (incl. battery) | 23,5kg |
| weight, ready for use (incl. battery) | 51,8lb |
| weight (excl. battery) | 21,9kg |
| weight (excl. battery) | 48,3lb |
Safety factors / tests
| hydraulic safety factor | 2:1 |
| endurance test tool | 1000 cycles of spreading and pulling while the tool is loaded and 1000 cycles of biting in material that cannot be cut |
| endurance test dead man's handle | 6000 cycles |
Norms
| EN 13204 compliant | yes |
| EN 13204 classification | CK45/468J-23.5 |
| EN 13204 2025 Ed classification | F-CT3-45/468-J |
| EN 13204 cutting capacity | 1J 2K 3K 4K 5K |
| NFPA 1960 compliant | yes |
| NFPA 1960, cutting capacity | A8 B9 C8 D9 E9 F4 |
| NFPA 1960, HPF | 23.605lbf |
| NFPA 1960, HPF | 105 / 10.7(kN/t) |
| NFPA 1960, LPF | 19.423lbf |
| NFPA 1960, LPF | 86.4 / 8.8(kN/t) |
| NFPA 1960, HSF | 10.589lbf |
| NFPA 1960, HSF | 47.1 / 4.8(kN/t) |
| NFPA 1960, LSF | 8.813lbf |
| NFPA 1960, LSF | 39.2 / 4(kN/t) |
Cutting performance
| round bar (S235 acc. to EN 13204) | 40mm |
| round bar (S235 acc. to EN 13204) | 1,6in |